OPT-24DC/230AC/ 2

https://www.phoenixcontact.com/us/products/2982171 Miniature solid-state relay - OPT-24DC/230AC/ 2 - 2982171 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Plug-in miniature solid-state relay, power solid-state relay, 1 N/O contact, input: 24 V DC, output: 24 - 253 V AC/2 A Product Features  Vibration and shock resistant  RT III wash tight (comparable with IP67)  Wear-free and durable  Can be soldered on PCB  Zero voltage switch at AC output  Switching power of up to 24 V DC/5 A   Key commercial data Packing unit 1 pc Minimum order quantity 10 pc Weight per Piece (excluding packing) 10.33 GRM Custom tariff number 85364190 Country of origin Hungary Technical data Dimensions Width 12.7 mm Height 29 mm Depth 15.7 mm Ambient conditions Ambient temperature (operation) -25 °C ... 60 °C Ambient temperature (storage/transport) -25 °C ... 70 °C Degree of protection IP64 10/10/2014   Page 1 / 5 https://www.phoenixcontact.com/us/products/2982171 Miniature solid-state relay - OPT-24DC/230AC/ 2 - 2982171 Technical data Input data Nominal input voltage UN 24 V DC Input voltage range in reference to UN 0.8 ... 1.2 Switching threshold "0" signal, voltage < 8.4 V DC Switching threshold "1" signal voltage > 18 V DC Typical input current at UN 7 mA Typical response time 10 ms Typical turn-off time 10 ms Type of protection Protection against polarity reversal Protective circuit/component Polarity protection diode Transmission frequency 10 Hz Output data Output nominal voltage 230 V AC Output voltage range 24 V AC ... 253 V AC Limiting continuous current 2 A (see derating curve) Maximum inrush current 30 A (10 ms) Min. load current 25 mA Leakage current typ. 1 mA Surge current 30 A (10 ms) Max. load value 4 A s (tp = 10 ms, at 25 °C) Voltage drop at max. limiting continuous current ≤1V Output circuit 2-conductor floating, zero voltage switch Type of protection Surge protection Protective circuit/component RC element 2 General Test voltage input/output 2.5 kV (50 Hz, 1 min.) Mounting position any Assembly instructions See derating curve Operating mode 100% operating factor Inflammability class according to UL 94 V0 Designation Standards/regulations Standards/regulations IEC 60664 EN 50178 IEC 62103 Rated surge voltage / insulation Basic insulation Rated insulation voltage 250 V AC Pollution degree 2 10/10/2014   Page 2 / 5 https://www.phoenixcontact.com/us/products/2982171 Miniature solid-state relay - OPT-24DC/230AC/ 2 - 2982171 Technical data General Surge voltage category III Classifications eCl@ss eCl@ss 4.0 27371102 eCl@ss 4.1 27371102 eCl@ss 5.0 27371001 eCl@ss 5.1 27371001 eCl@ss 6.0 27371604 eCl@ss 7.0 27371604 eCl@ss 8.0 27371604 ETIM ETIM 2.0 EC001504 ETIM 3.0 EC001504 ETIM 4.0 EC001504 ETIM 5.0 EC001504 UNSPSC UNSPSC 6.01 30211916 UNSPSC 7.0901 39121542 UNSPSC 11 39121542 UNSPSC 12.01 39121542 UNSPSC 13.2 39121542 Approvals Approvals Approvals UL Recognized / cUL Recognized / UL Recognized / cUL Recognized / cULus Recognized Ex Approvals Approvals submitted 10/10/2014   Page 3 / 5 https://www.phoenixcontact.com/us/products/2982171 Miniature solid-state relay - OPT-24DC/230AC/ 2 - 2982171 Approvals Approval details UL Recognized  cUL Recognized  UL Recognized  cUL Recognized  cULus Recognized  Drawings Drilling diagram 5 1,28 Load current [A] 1,3 Diagram 1 2 1,8 1,6 1,4 1,2 1 0,8 0,6 0 2 0 25 30 35 40 45 50 55 60 Ambient temperature [°C] 1 In rows with 10 mm spacing 2 In rows with zero spacing 10/10/2014   Page 4 / 5 https://www.phoenixcontact.com/us/products/2982171 Miniature solid-state relay - OPT-24DC/230AC/ 2 - 2982171 Dimensioned drawing 3,6 15,7 29 Circuit diagram 12,7 A1 13 14 A2 Phoenix Contact 2014 © - all rights reserved http://www.phoenixcontact.com 10/10/2014   Page 5 / 5